We teach two methods that can be used to retrieve a damaged pixel on your LCD screen.
As repair damaged in a pixel LCD display:
In this article we refer to a pixel of an LCD monitor that is not working properly. Here are two methods that you can use and who returned believer even the most skeptical. Try not lose anything and then you described.
In the first instance let's say that a pixel of an LCD monitor any device. (Monitor, TV, Portable, PSP, etc.). May be red, blue or green and has three ways to fail to be called:
Pixel dead (Dead pixel): It is one pixel that is always in black, does not emit light of any color or intensity.
Pixel stuck or locked (stuck-pixel): It is one that shows only two levels of light, either on or off without going through all the intermediate levels.
Pixel hot (hot-pixel): It is one pixel that is emitting light on an ongoing basis. This light is red, green or blue and it does so at its maximum capacity.
These faults can occur at any time in TFT LCD display technology, it's more, you can be on your screen from the first second of use, these defects not covered by the guarantee if it does not exceed a certain number of pixels. It seems joke but it is not, at least for now until the companies reduce these defects to the point that the change of a team does not mean economic unbalance.
To try to remedy these shortcomings, there are two methods, one for software and another will say that the "hardware".
Method software to repair damaged pixel
It consists of a small program that produces intense flashes in a small window, which move to the area where the pixel damaged We can repeat several times to get the result. There are many versions of programs that do this work, because the programming is really very simple. One of the programs you can download is the UDPix, which also helps detect pixels damaged by putting the entire screen of the same color.
This method is very effective and truly consists of the following:
1 - Get a cloth or a slightly damp towel. Slightly means that should not run water from the cloth at any time. Humid, not wet. 2 - Locate and remembers the place where the pixel that this wrong and then completely shut down the LCD screen.
3 - With the yolk of the finger, apply slight pressure in the area where the pixel is damaged, using the damp. No more pressure because you can damage other pixels, pressure is mild with slight movements of the thumb on that is faulty. 4 - And during this task, turns on the screen so that it is lit, with a strong image as much as possible. Remove pressure and cloth, the pixel should be working.
This method is effective in 80%. Try it and then let us your feedback.
Download pdf
Print version